Sharpness
This sets the sharpness of the image that will be captured. * Hard / Normal / Soft
Saturation
This sets the saturation of the image that will be captured. * High / Normal / Low
White Balance
This sets the white balance for a variety of lighting conditions and permits images to be captured that approach the conditions that are seen by the human eye.
*[ Blank ] Auto
*[ 
] Incandescent
*[ 
] Fluorescent 1
*[ 
] Fluorescent 2
*[ 
] Daylight
*[ 
] Cloudy
*[ 
] Manual
Manual WB
This manually sets the white balance and stores it. Use of this is convenient when the white balance does not offer a good match.
Before selecting [Execute] and before taking your image, place a white paper in the scene and set the white balance manually.
* Cancel / Execute
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixelated (grainier) the image will appear.
*[Blank] Auto
*[ 
] ISO 64
*[ 
] ISO 100
*[ 
] ISO 200
*[ 
] ISO 400
*[ 
] ISO 800
*[ 
] ISO 1600
Metering
This sets the metering method for calculating the exposure.
*Center: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.
*Multi: The entire area of the screen is measured, and the exposure is calculated.
*Spot: A very small portion of the center of the screen is measured to calculate the correct exposure.
Color
This sets the color of the image that will be captured.
* Normal / Vivid / Sepia / Monochrome / Blue / Red / Green / Yellow / Purple