3. If you select [Single] in the previous step, the figure shown on the right hand side will appear. „ Select the image that you want to print with

the e / f buttons.

„ Select the [Print Num] (up to 99) with the c / d buttons.

„ After selecting the desired image and printing number, press the button to confirm.

4. Select [Exit] with the c / d buttons, and press the button.

5. Select [Print] with the c / d buttons, and press the button to start printing.

6. The printing starts and the figure shown on the

 

right hand side appears.

USB

„[COMPLETE] will be displayed temporarily, reminding you that the printing procedure is

finished.

„ If an error is detected during the connectionPRINTING (i.e. the printer hardware problem) between

camera and printer, [PRINT ERROR] will be displayed.

„If an error is detected during the communication

(i.e. wrong setting on the camera) between camera and printer, [ERROR] will be displayed.

„The image printing may fail if the power to the camera is cut off.

EN-41