STEP 6 – Front Handlebar Assembly
Remove the Allen Bolts, Washers and Nuts with Nut Caps from the Front Handlebar and the Bolt and Washer from the Handlebar Tube. Position the Front Handlebar in place on the Handlebar Tube with the bolt hole at the bottom. Replace the Bolts, Washers, Nuts and Nut Caps you just removed and tighten with the Wrench provided.
front
handlebar
allen bolts,
washers, nuts and nut caps
handlebar
tube
bolt and
washer
front of unit
looking from the right side
main frame
assembly
front
handlebar
allen bolts,
washers, nuts and nut caps
handlebar
tube
bolt and
washer
STEP 7 – Computer Assembly
a)Remove the four Phillips Bolts from the back of the Computer.
b)Snap together Connectors for Computer, tucking the Wires inside the Handlebar Tube. Be careful not to pinch wires.
The Book Holder can be attached to the Computer at any time.
c)Attach the Computer using the four Bolts removed in (a). Tighten with the Screwdriver provided.
computer
heart rate
receiver
7b
connectors
book holder
Front
View
handlebar
tube
7d |
|
|
four "C" batteries | battery | |
|
| door |
4 | 3 |
|
1 | 2 | back of |
|
| |
|
| computer |
7c
d)Remove Battery Door on the back of the Computer. Insert four “C” Batteries (included) in numbered order and replace Battery Door.
Back View
handlebar
tube
front
handlebar
front of
STEP 8 –
Water Bottle
Holder
Remove Phillips Screws from Handlebar Tube. Line up Water Bottle Holder and attach to the Handlebar Tube by
8
handlebar
tube
remove and
water bottle holder
STEP 9 – AC Adapter
Insert AC Adapter into front of unit, then plug into wall.
unit
9
8
remove and
front of unit
main frame
assembly
Assembly is now complete.
IMPORTANT:
Please read pages
7.5r Recumbent Bike.
