Fitness Quest NBP01060-2 manual Foot Tube Assembly, Seat Assembly

STEP 1 – Foot Tube Assembly

Remove the two Carriage Bolts, Washers and Nylon Nuts from both the Front Foot Tube with Rollers and the Rear Foot Tube with Caps.

Align the Rear Foot Tube with the rear of the Main Frame Assembly. Make sure the square holes in the Rear Foot Tube are on the outside. Insert Bolt through the Rear Foot Tube and Main Frame Assembly. Secure with Washers and Nuts you just removed. Tighten with the

rear of unit

1

replace washer

and nut from top side

rear foot tube

assembly shown

Wrench provided.

Repeat on the front of the unit using the

replace bolt from

bottom side up

(no roller on

rear foot tube)

Front Foot Tube with Rollers.

into square holes on rear foot tube

main frame

assembly

rear	front
of unit	of unit

STEP 2 – Seat Assembly

a)Lay the Seat upside down. Remove the four Nuts and Washers on the underside of the Seat. Place the Seat Post Slider over the Bolts on the back of the Seat. Replace the Washers and Nuts. Tighten with the Wrench provided.

b)Slide the Seat Post into the rear of the Main Frame by loosening the Height Adjustment Knob (aligning the holes with the adjust- ment Knob). Once in position, turn the Height Adjustment Knob to tighten it.

c)Slide the Seat Post Slider into the Seat Post making sure the Seat is facing forward.

2a	seat post
	slider

nuts and	nuts and
washers	washers

d)Insert the Seat Adjustment Knob into the hole on the Seat Post and tighten into place. Make sure the Seat Post Slider is pushed into the Seat Post far enough for the Seat Adjustment Knob to “catch” into the slot on the Seat Post Slider.

2b

seat post

height

adjustment

knob

2c

seat

seat post

slider

seat post

height

adjustment

knob

2d
	seat adjustment
	knob
	seat
seat post	slot
slider
	seat post
	height
	adjustment
	knob

6