Flowtron Outdoor Products LE-800B Assembly, Preparation, Assembling Legs or Mounting Brackets

ASSEMBLY

A. Preparation

Your owner’s manual has been developed to help you assemble the unit and to understand its safe operation. It is important that you read your manual completely to become familiar with the unit before you begin assembly.

1.Read your owner’s manual

2.Tools you will need

1. Assembling Legs or Mounting Brackets

To install the three legs or the three mounting brackets, align the three stud plates with the six mating holes in the lower housing. Fasten the legs or brackets with the six #10 - 32 self-locking hex nuts as shown in Figures #3 or #4. When using the legs, slip the three leg caps onto the end of each leg.

a. #2 Phillips Head Screwdriver

b. 3/8” Nut Driver

Hardware Bag Contents:

Qty. Description Looks Like

3Container Mounting Bracket

3Stud Plate

2Screw, Pan Head, 10-32 x 3/8”

3Screw, Sht. Mtl., #10 x 5/8”

4Screw, Sht. Mtl., #10 x 1/2, Blk.

8Hex Nut, Self-Lock, 10-32

4Washer, #10

3Tinnerman Clips

3Leg Caps

36 Cutting Lines

FIGURE 3

FIGURE 4

page 4