1060AM-NM-LRVAR
Operators Manual
Electrical
Requirements
120 VAC 50/60 Hz
120 VAC 50/60 Hz
120 VAC 50/60hz
2.3 Receiving Inspection
Upon receipt of the unit:
1.Inspect the carton(s) and contents for damage. If damage is evident, file a claim with the carrier and notify
Fluke Biomedical at 440.248.9300.
2.Remove the contents from the packing material.
3.Verify that all items listed on the packing list have been received and are in good condition.
If any of the listed items are missing or damaged, notify Fluke Biomedical.
2.4Storage
Storage of Fluke Biomedical instruments must comply with Level B storage requirements as outlined in ANSI N45.2.2
(1972) Section 6.1.2(.2). The storage area shall comply with ANSI N45.2.2 (1972) Section 6.2 Storage Area, Paragraphs
6.2.1 through 6.2.5. Housekeeping shall conform to ANSI N45.2.3 (1972).
Level B components shall be stored within a fire resistant, tear resistant, weather tight enclosure, in a
building or equivalent.
Storage of Fluke Biomedical instruments must comply with the following:
1.Inspection and examination of items in storage must be in accordance with ANSI N45.2.2 (1972) Section 6.4.1.
2.Requirements for proper storage must be documented and written procedures or instructions must be established
3.In the event of fire,
4.Removal of items from storage must be in accordance with ANSI N45.2.2 (1972), Section 6.5 and 6.6.
