Fluke 110 user manual Contacting Fluke, Unsafe Voltage, Test Lead Alert

The Fluke Model 110, Model 111, and Model 112 are battery- powered, true-RMS multimeters (hereafter "the Meter") with a 6000-count display and a bar graph. This manual applies to all three models. All figures show the Model 112.

The Meter measures or tests the following:

∙AC / DC voltage and current

∙Resistance

∙Continuity

∙Diodes

∙Voltage and current frequency

∙Capacitance

These meters meet CAT III IEC 61010-1-95 standards. The IEC 61010-1-95 safety standard defines four overvoltage categories (CAT I to IV) based on the magnitude of danger from transient impulses. CAT III meters are designed to protect against transients in fixed-equipment installations at the distribution level.

Contacting Fluke

To contact Fluke, call:

1-888-993-5853 in USA and Canada +31 402-678-200 in Europe +81-3-3434-0181 in Japan

+65-738-5655 in Singapore

+1-425-446-5500 anywhere in the world Visit Fluke’s web site at: www.fluke.com. Register your Meter at: www.fluke-warranty.com.

Models 110, 111 & 112

True RMS Multimeters

"Warning" and "Caution" Statements

A "WWarning" statement identifies hazardous conditions and actions that could cause bodily harm or death.

A"Caution" statement identifies conditions and actions that could damage the Meter or the equipment under test.

Unsafe Voltage

To alert you to the presence of a potentially hazardous voltage, the Y symbol is displayed when the Meter detects a voltage

≥30 V or a voltage overload (OL) condition.

Test Lead Alert W

Warning

Personal injury or damage to the Meter can occur if you attempt to make a measurement with a lead in an incorrect terminal.

To remind you to check that the test leads are in the correct terminals, LEAd is displayed briefly when you move the rotary switch to or from any A position.

1