![](/images/new-backgrounds/1329987/32998719x1.webp)
Models 110, 111 & 112
Users Manual
Making Basic Measurements | Measuring AC and DC Voltage |
The figures on the following pages show how to make basic measurements.
When connecting the test leads to the circuit or device, connect the common (COM) test lead before connecting the live lead; when removing the test leads, remove the live lead before removing the common test leadW.
Warning
To avoid electric shock, injury, or damage to the Meter, disconnect circuit power and discharge all
Note
In reading AC voltage or current, for the integrated RMS converter to correctly measure distorted waveforms, reading settling time increases to several seconds at the low end of AC voltage and current ranges.
The Meter is not specified for use with current clamp accessories.
Volts AC | Volts DC |
VV
aej03f.eps
6