![Operation](/images/new-backgrounds/108576/1085765x1.webp)
Serial 80 Column
Operation
7.Press the PRINT button on the Hydra if necessary to turn PRN on.
•2620A Data Acquisition Unit
1.Check that the PRN annunciator on the display is on.
2.Press the PRINT button on the Hydra if necessary to turn PRN on.
Operation
Before starting Scan on the Hydra, ensure that the Printer is set up and paper is loaded. Also check that the Hydra is set to Autoprint mode as described above. Press the SELECT button on the front of the Printer if necessary to put it
Press the SCAN button on the Hydra to start scanning. The Printer should print each scan as it occurs. Press SCAN again to stop scanning.
Note
The Printer has been set to operate in its default factory setting as an accessory to the Hydra. Please refer to the manufacturer’s instructions and supplied software for operating the Printer in other applications. Refer to the included
Specifications
Paper
Type | Feed | Weight | Width | |
|
|
|
| |
|
| 16 to 21 lb. | 3 in to 9.5 in | |
Cut Sheets | Top only | US Bond | ||
(76 to 241 mm) | ||||
|
| (60 to 81 g/m²) | ||
|
|
| ||
|
|
|
| |
Continuous, | Rear/ | 14 to 20 lb. | 3 in to 9.9 in | |
US Bond | ||||
Single Part | Bottom | (76 to 251 mm) | ||
(53 to 75 g/m²) | ||||
|
|
| ||
|
|
|
| |
Continuous, |
|
|
| |
Multipart |
|
|
| |
• 4 sheets | Rear/ | 14 to 20 lb. | 3 in to 9.9 in | |
(orig.+3), | US Bond | |||
Bottom | (76 to 251 mm) | |||
Carbonless | (53 to 75 g/m²) | |||
|
| |||
• Up to 0.11" |
|
|
| |
(0.28 mm) |
|
|
| |
|
|
|
| |
Reliability |
|
|
| |
Ribbon Life | 3 million characters (avg.) |
Print head Life | 200 million characters average in |
| 10 cpi utility mode |
Mean Time | 20,000 hours at 25 % duty cycle |
Between | and 35 % page density |
Failures |
|
(MTBF) |
|
Physical |
|
Height | 3.15 in (80 mm) |
General
Print Method
Print head
Emulations
Print Speed, characters per second (cps)
Buffer size
Impact dot matrix
9 pins, 0.0118 in (0.30 mm) diameter, with thermal protection
IBM 2480 Epson ESC/P2
Okidata MICROLINE Standard
Super Speed | 375 cps | |
Draft (SSD) | (12 cpi only) | |
High Speed | 333 cps | |
Draft (HSD) | ||
| ||
Utility (UTL) | 250 cps | |
Near Letter |
|
Quality (NLQ) | 62.5 cps |
| |
128 Kb |
|
Width | 14.65 in (372 mm) |
Depth | 10.83 in (275 mm) |
Weight | 9.9 lb (4.5 Kg) |
Electrical |
|
Voltage | 120 V, +6 %, |
| |
| 230 V, +15 %, |
| |
Frequency | 50 or 60 Hz, ±2 % |
3