Continuity Test ( R )
+ | _ | + | _ |
|
|
hr5f.eps
If continuity exists (resistance < 210 Ω), the beeper sounds continuously. The meter beeps twice if it is in the Touch Hold® mode.
Current (? A)
WWarning
To avoid injury, do not attempt a current measurement if the open circuit voltage is above the rated voltage of the meter.
To avoid blowing an input fuse, use the 10 A jack until you are sure that the current is less than 300 mA.
Turn off power to the circuit. Break the circuit. (For circuits of more than 10 amps, use a current clamp.) Put the meter in series with the circuit as shown and turn power on.
1
4
2
DC
70
VA
+
_
3
hr8f.eps
