9
Guarantee, Fault Finding Hints, Service Recommendations & Certificate of Conformity
Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within one year of original purchase, Flymo/Partner, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Flymo/Partner.
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used outside of the country for which it was specified.
(i)The machine has not been used commercially.
*This guarantee is additional to, and in no way diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:
Failures not covered by guarantee
*Replacing Nylon Line.
*Failures as a result of not reporting an initial fault.
*Failures as a result of sudden impact.
*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Operator's Manual.
*Machines used for hire are not covered by this guarantee.
*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, therefore not normally subject to a valid warranty claim: Nylon Line, Electric Mains cable.
*Caution!
Flymo/Partner does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Flymo/Partner, or by the machine having been modified in any way
Fault Finding Hints
1.Line too short Manually feed out the line.
2.Line broken inside cutting head Remove cap and
3.Line jammed on spool
Remove cap and spool and rewind line to remove crossed loops.
4.Excess line feed
Battery needs to be charged.
5.Poor performance
Ensure inside of cutting head housing is clean and free from debris.
6.Trimmer stops during use
Release switch lever and wait 30 seconds before
Service Recommendations
To ensure the maximum life and reliability from your Flymo product we recommend that it is serviced regularly by an approved Flymo/Partner Service Centre/Dealer. They have the equipment facilities and trained personnel to advise you on the service requirements of your machine. Depending on the machine's use they will recommend one of the various types of service which are designed to ensure the maximum economic service life of your machine.
Certificate of Conformity
I, the undersigned P. Howells of | I, the undersigned P. Howells of |
|
| I, the undersigned P. Howells of |
|
|
|
|
| ||||
Flymo/Partner, a Division of Electrolux | Flymo/Partner, a Division of Electrolux |
| Flymo/Partner, a Division of Electrolux |
|
| ||||||||
Outdoor Products Limited, Aycliffe | Outdoor Products Limited, Aycliffe |
| Outdoor Products Limited, Aycliffe |
|
| ||||||||
Industrial Estate, | NEWTON AYCLIFFE, | Industrial Estate, | NEWTON AYCLIFFE, | Industrial Estate, NEWTON AYCLIFFE, Co. |
| (GB | |||||||
Co. Durham. DL5 6UP. | Certify that a | Co. Durham. DL5 6UP. Certify that a |
| Durham. DL5 6UP. Certify that | a sample |
| |||||||
sample of the above product has been | sample of the above product has been |
| of the above product has been tested |
|
|
| ) | ||||||
tested and found to comply with | tested using directive 81/1051/EEC as a | using ISO 5349 as a guide. The maximum |
| ||||||||||
| MAINTENANCE | ||||||||||||
directives:- |
| guide. The maximum |
| weighted root mean square value of |
|
|
| ||||||
NEWTON |
| NEWTON |
|
|
| NEWTON |
|
|
|
| |||
89/392/EEC, 89/336/EEC, 73/23/EEC | pressure level recorded at operator |
| vibration recorded at operator’s hand |
|
|
|
| ||||||
|
| position under free field semi anechoic |
| position was:- |
|
|
|
|
| ||||
|
| chamber conditions was :- |
|
|
|
|
|
|
|
|
|
| |
|
|
| Type |
|
|
| Type |
|
|
|
| ||
|
|
| Identification of Series | See Product Rating |
| Identification of Series | See Product Rating |
|
|
| |||
|
|
|
| Label |
|
| Label |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| Level |
| 77.2 dB(A) |
| Value |
| 1.6 m/s 2 |
|
|
| |
Signed at |
| Signed at |
|
|
| Signed at |
|
|
|
|
| ||
AYCLIFFE |
| AYCLIFFE |
|
|
| AYCLIFFE |
|
|
|
|
| ||
|
|
|
|
|
| ||||||||
1998 |
| 1998 |
|
|
| 1998 |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
