8
How to trim and edge
M | 1 |
| |
| 2 |
N |
To start your trimmer
1.Hold as illustrated in Fig M.
2.To start, press
How to trim
1. | Cut with nylon line at an angle using the tip. |
| See Fig N |
2. | Swing trimmer in and out of the cutting area |
O |
|
P | Q |
taking small cuts (O) |
3. Line is fed out automatically every time the |
trimmer head stops rotating and returns to |
operating speed. |
•Extra line can be fed out manually as described on page 9.
4.To stop your trimmer release the switch
lever (M2).
How to edge
1. | To convert to edging mode, depress locking |
| button and twist head |
| arrow lines up with "EDGE". An audible |
| "click" will confirm that the head is locked. |
| Ensure the button has returned to its |
| original position. See Fig P. |
2. | Rest edger on roller for extra stability and |
| line up with edge of lawn. See Fig R. Edge |
| in direction indicated in Fig Q. so that |
R |
S |
debris is thrown away from you. |
3. To return to trimming mode, depress |
locking button and twist head clockwise |
until arrow lines up with "TRIM". An audible |
"click" will confirm that the head is locked. |
Ensure the button has returned to its |
original position. See Fig S. |
Spool Cap
USE
T | cap | |
release | ||
| ||
| latches | |
U | cap |
To remove spool cap
1.Press and hold in the two cap release latches. See Fig T.
2.Pull cap away from the cutting head. See
Fig U.
When refitting the spool cap
1. | Keep all areas of the cap and spoolholder |
| clean. Failure to do so may prevent the |
| cap being securely located in the |
| spoolholder. |
2. | Align the two latches on the cap with the |
| two windows in the spoolholder, then press |
| down into the locked position. |
spool
manual line feed button
spoolholder
eyelet
3. | Ensure the two cap release latches are |
| clearly visible and are fully engaged with |
| the windows in the spoolholder. |
4. | Check that the cap is correctly fitted by |
| trying to remove it without depressing the |
| two latches. |
