Flymo Pac a Mow Caring for your Lawnmower, Cleaning T, USE Gloves, Transporting your Lawnmower

Caring for your Lawnmower

T

Cleaning (T)

•USE GLOVES

•IMPORTANT It is very important that you keep your lawn- mower clean. Grass clippings left in any of the air intakes or under the lawnmower could become a potential fire hazard.

1.Remove grass from under the lawnmower with brush.

2.Using a soft brush - remove grass clippings from all air intakes, the discharge chute and the grass box.

3.Remove the Blade, see Figure S, to gain access to

the Fan and clean with a soft brush.

4.Wipe over the surface of your lawnmower with a dry cloth.

• IMPORTANT Never use water for cleaning your lawn- mower. Do not clean with chemicals, including petrol, or

solvents - some can destroy critical plastic parts.

At the End of the Mowing Season

1.Replace Blade, Bolts, Nuts or Screws, if necessary.

2.Clean your lawnmower thoroughly.

3.Make sure that the electric cable is coiled properly.

	Storing and Transporting your Lawnmower
V1	V3

V2

Storing your Lawnmower		W
•	Warning:- This product is heavy, use
	extra care when lifting.
•	Warning:- Be careful when folding han-
	dles to prevent entrapment of fingers.		2
•	Before storage, ensure that the front
	height of cut is at its lowest (V1). Failure		4
	to ensure this will prevent the product	1
	from fitting into the grassbox (V2).		3
1.	Remove the Grassbox and place in front
	of the product (V3).
2.	Push the product halfway into the Grassbox,
3.	Unlock the Cam Locks on the Lower
	Handle (W1) and fold the Handles forward
	over the product (W2).
4.	Push the product further into the Grassbox
	(W3) until the top of the Lower Handle locates
	under the Grassbox Hook (W4).		8. Store your product in a cool, dry place where it is
5.	Lock the Cam Locks on the Lower Handle
			protected from damage
6.	Unlock the Cam Locks on the Upper Handle (X1) and
			Transporting your Lawnmower
	fold it over to meet the Lower Handle (X2). Leave
			Your product can be transported by unfolding the Upper
	the Cam Locks unlocked.
			Handle from its storage position, locking the Cam Locks
7.	Wrap the cable around the Handle using the hook on
			and pulling it along on its roller (Z1)
	the Cable Hooks (Y2) and the Grassbox (Y1).

X

1

2

Y

1

2

Z

1