Instruction Manual
Carton Contents
Switch Handle
Steady Handle
Tube
Trimmer Head
|
| Electric Cable with |
Guard |
| moulded on plug |
|
|
|
Wheel
IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product.
IF ANY PARTS ARE MISSING CONTACT:-
Electrolux Outdoor Products Customer Service Department direct
Telephone : 01325 300303, Fax : 01325 318193
Safety
If not used properly this trimmer can be dangerous! This trimmer can cause serious injury to the opera- tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this trimmer. The operator is responsible for following the warning and safety instruc- tions in this manual and on the trimmer.
Explanation of Symbols on the Contour Power Plus
Warning
Read the user instructions carefully to make sure you understand all the con- trols and what they do.
The use of eye protection is recommend- ed to protect against objects thrown by the cutting line.
To avoid the possibility of electric shock, do not use in damp or wet conditions.
10m
Keep others, including children, pets and bystanders outside the 10 metre hazard zone. Stop the trimmer immediately if you are approached.
Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged.
Warning: The cutting line continues to rotate after the machine has been switched off.
General
1.Never allow children or people unfamiliar with these instructions to use the trimmer. Local regulations may restrict the age of the operator.
2.Only use the trimmer in the manner and for the functions described in these instructions.
3.Never operate the trimmer when you are tired, ill or under the influence of alcohol, drugs or medicine.
4.The operator or user is responsible for accidents or hazards occurring to other people or their property.
Electrical
1.The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it.
2.Before use, examine cable for damage. If there are signs of damage or ageing, it must be replaced by the manufacturers service agent or a similar quali- fied person to avoid hazard.
