Environmental Information
Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to compa- ny procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your house- hold waste disposal service or the shop where you purchased the product.
EC Declaration of Conformity
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 6UP. Certify that the product:- Category........ Electric Hover
Make.............. Husqvarna Outdoor
Products
Conforms to the specifications of Directive 2000/14/EEC
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 6UP Certify that a sample of the above product has been tested using directive 81/1051/EEC as a guide. The maximum A - weighted sound pressure level recorded at operator position under free field semi ane- choic chamber conditions was :-
I, the undersigned M. Bowden of Husqvarna Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5 6UP Certify that a sample of the above product has been tested using ISO 5349 as a guide. The maximum weighted root mean square value of vibra- tion recorded at operator’s hand position was:-
Type of Cutting Device.... | Rotary Blade |
Identification of Series | .See Product Rating Label |
Conformity Assesment Procedure....ANNEX VI | |
Notified Body | I . T.S . , Cleeve Road, Leatherhead, |
Other | Surrey. KT22 7SB England |
98/37/EEC, 89/336/EEC, 73/23/EEC | |
&applicable
EN55014:1993, EN55014:1995, EN836:1997, IEC335 - 1:1991, IEC335 - 2 - 77:1996
Type | A |
Width of Cut | B |
Speed of Rotation of Cutting Device | C |
Guaranteed sound power level | D |
Measured Sound Power Level | E |
Level | F |
Value | G |
Weight | H |
A | TC330 |
| A | TC350 |
|
B | 33 cm |
| B | 35 cm |
|
C | 4,300 RPM |
| C | 4,300 RPM |
|
D | 93 dB (A) |
| D | 94 dB (A) |
|
E | 92 dB (A) |
| E | 91 dB (A) | Newton Aycliffe, 10/01/2006 |
F | 78.8 dB(A) |
| F | 78.8 dB(A) | |
| M. Bowden, | ||||
G | 1.64 m/s2 |
| G | 1.64 m/s2 | |
| Research & Development Director | ||||
H | 10.5 kg |
| H | 10.5 kg |
|
Husqvarna Outdoor Products
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - (00) 44 1325 300303 Fax - (00) 44 1325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
