Fault Finding Chart

WARNING Remove the Battery Pack before attempting any maintenance or adjustment.

FAULT

LINE NOT FEEDING

OR

LINE TOO SHORT

OR

TRIMMER VIBRATES

CHECK

 

 

Is the automatic line feed work-

 

No

 

 

ing?

 

 

 

 

 

 

 

 

 

 

 

 

 

Is the line fed out and visible?

 

No

 

 

Has line been removed from

 

 

 

 

 

 

cleat?

 

 

 

 

 

 

No

 

 

Is the manual line feed working?

 

 

 

 

 

 

 

 

 

 

 

 

ACTION

Manually feed out line.

SEE “MANUAL LINE FEED”

Remove cap and spool, free line and re-fit spool and cap. SEE “CUT-

TING HEAD”

The line may be jammed on the spool. Rewind line to remove crossed loops. Check that line is in correct section of spool.

CONTINUOUS CLATTER-

ING NOISE

Has the motor reached full speed before use?

Has too much line been fed out?

Is the line cutter missing from the safety guard?

No Yes

Yes

Allow the motor to reach full speed before use.

SEE “MANUAL LINE FEED”

Contact your local approved Serv- ice Centre or Husqvarna UK Ltd. Customer Service.

LINE SNAPS CONTINU-

OUSLY

WHEEL STOPS TURNING

IF NONE OF THE ABOVE OR IF FAULT PERSISTS

Are you using the trimmer cor-

 

?

 

Only use tip of nylon line to trim.

rectly?

 

 

SEE “How to trim and edge”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rewind the line on the spool, if

Is the line jamming on the spool?

 

Yes

 

symptoms still persist, change

 

 

 

 

 

 

spool and line.

 

 

 

 

Clean wheel and groove on trimmer head. SEE “MAINTENANCE”

Contact Husqvarna UK Ltd. Customer Service

Telephone : 0844 844 4558 UK

1800 882 350 ROI

Replacement Parts

Spool and Line

FLY047

Part no.:

510747890

Reference no.:

Environmental Information

Awareness of the environment must be considered when disposing of ‘end-of-life’ product.

If necessary, contact your local authority for disposal in- formation.

BATTERY DISPOSAL

The battery must be removed from the product before disposal (See Battery Replacement Section)

This product contains a NiMH battery and should not be discarded with normal household waste at the end of its life.

The battery should be taken to an Authorised Service Centre or your local Recycling Station.

Do NOT dispose of battery to water.

NiMH batteries can be harmful and should be disposed of through the recognised recycling facility in accor- dance with European Regulations.

Do NOT incinerate.

The symbol on the product or on its packaging indi- cates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the envi- ronment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council office, your household waste disposal service or the shop where you purchased the product.

Service Recommendations

Your product is uniquely identified by a silver and black product rating label.

We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

Page 8
Image 8
Flymo XT manual Fault Finding Chart, Replacement Parts, Environmental Information, Service Recommendations