Guarantee & Guarantee Policy
If any part is found to be defective due to faulty manufacture within the guarantee period, Husqvarna UK Ltd., through its Authorised Service Repairers will effect the repair or replacement to the cus- tomer free of charge providing:
(a)The fault is reported directly to the Authorised Repairer.
(b)Proof of purchase is provided.
(c)The fault is not caused by misuse, neglect or faulty adjust- ment by the user.
(d)The failure has not occurred through fair wear and tear.
(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna UK Ltd..
(f)The machine has not been used for hire.
(g)The machine is owned by the original purchaser.
(h)The machine has not been used commercially.
*This guarantee is additional to, and in no way diminishes the
customers statutory rights.
Failures due to the following are not covered, therefore it is important that you read the instructions contained in this Operator's Manual and understand how to operate and maintain your machine:
Failures not covered by guarantee
*Replacing Nylon Line.
*Failures as a result of not reporting an initial fault.
*Failures as a result of sudden impact.
*Failures as a result of not using the product in accordance with the instructions and recommendations contained in this Opera- tor's Manual.
*Machines used for hire are not covered by this guarantee.
*The following items listed are considered as wearing parts and their life is dependent on regular maintenance and are, there- fore not normally subject to a valid warranty claim: Nylon Line, Spool and Line.
*Caution!
Husqvarna UK Ltd. does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufactured or approved by Husqvarna UK Ltd., or by the ma- chine having been modified in any way.
EC Declaration of Conformity
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category | Battery Lawn Trimmer |
| |
Type(s) |
|
| |
Identification of Series | See Product Rating Label |
| |
Year of Construction | See Product Rating Label |
| |
Conforms to the essential requirements & provisions of the following EC Directives: | |||
2006/42/EC, 2004/108/EC, 2000/14/EC |
|
| |
based on the following EU harmonized standards applied: |
| ||
The maximum A weighted sound pressure level LpA at the operator’s position, recorded on a sample of the above prod- | |||
uct(s) corresponds to the Level given in the table. |
| ||
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above | |||
product(s) corresponds to the Value ah given in the table. |
| ||
2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated | |||
figures. |
|
|
|
Conformity Assessment Procedure | Annex VI |
| |
Notified Body | Intertek, Cleeve Road |
| |
|
| Leatherhead, Surrey |
|
|
| KT22 7SB, England |
|
Newton Aycliffe 26/10/2010 |
|
| |
P. Lameli |
|
|
|
Global R&D Director - Hand held |
|
| |
Husqvarna UK Ltd. |
|
|
|
Keeper of technical documentation |
|
| |
Type |
|
|
|
Width of Cut (cm) |
| 25 | |
Speed of Rotation of Cutting Device (rpm) | 8,500 | ||
Measured Sound Power LWA (dB(A)) | 90 | ||
Guaranteed Sound Power LWA (dB(A)) |
| ||
|
|
| 96 |
Level (dB(A)) |
|
| |
|
|
| 80.4 |
Uncertainty (dB(A)) |
|
| |
|
|
| 2.5 |
Value ah (m/s2) |
|
| |
|
|
| 2.19 |
Uncertainty K of ah (m/s2) | 1.5 | ||
Weight (Kg) |
|
| |
|
|
| 2.1 |
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. Copy-
right © 2010 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks of
| Flymo S.A. |
| Husqvarna AB |
| 561 82 |
Huskvarna | |
Sweden |
