FIREPLACE MANUFACTURERS INCORPORATED

UNVENTED PROPANE/LP GAS LOG HEATER

INSTALLATION

Continued

INSTALLING DAMPER CLAMP ACCESSORY FOR VENTED OPERATION

Note: When used as a vented heater, appli- ance must be installed only in a solid-fuel burning fireplace with a working flue and constructed of noncombustible material.

If your heater is a manually controlled model, you may use this heater as a vented product. There are three reasons for operating your heater in the vented mode.

Damper Clamp

 

Damper

Damper

Damper

Clamp

 

Damper

Masonry Fireplace

Manufactured Fireplace

Figure 10 - Attaching Damper Clamp

1.The fireplace does not meet the clear- ance to combustibles requirements for vent-free operation.

2.State or local codes do not permit vent- free operation.

3.You prefer vented operation.

If reasons number 1 or 2 above apply to you, you must permanently open chimney flue damper. You must install the damper clamp accessory (to order, see Accessories, page 21). This will insure vented operation (see Figure 10). The damper clamp will keep damper open. Installation instructions are included with clamp accessory.

See chart below for minimum permanent flue opening you must provide. Attach damper clamp so the minimum permanent flue opening will be maintained at all times.

Area of Various Standard

Round Flues

Diameter (ins.)

Area (sq. ins.)

 

 

 

5"

 

20 sq. inches

6"

 

29 sq. inches

7"

 

39 sq. inches

8"

 

51 sq. inches

 

 

 

 

 

 

Chimney

Minimum Permanent

Height (ft.)

Flue Opening (sq. ins.)

 

 

 

6' to 15'

 

39 sq. inches

15' to 30'

 

2.9 sq. inches

 

 

 

INSTALLING HEATER BASE ASSEMBLY

CAUTION: Do not remove the metal data plates attached to the heater base assembly. The data plates contain important warranty information.

WARNING: You must secure this heater to fireplace floor. If not, heater will move when you adjust controls. Moving heater may cause a gas leak.

WARNING: If installing in a sunken fireplace, special care is needed. You must raise the fire- place floor to allow access to heater control panel. This will in- sure adequate air flow and guard against sooting. Raise fireplace floor with noncombustible mate- rial. Make sure material is secure.

CAUTION: Do not pick up heater base assembly by the burner. This could damage heater. Only handle base assem- bly by grates.

IMPORTANT: Make sure the heater burner is level. If heater is not level, heater will not work properly.

Installation Items Needed

hardware package (provided with heater)

approved flexible gas hose (not provided) (if allowed by local codes)

sealant (resistant to propane/LP gas, not provided)

electric drill with 3/16" drill bit (metal or masonry as applicable)

flathead screwdriver

1.Apply pipe joint sealant lightly to male threads of the fitting to be threaded into gas control. Connect approved flexible gas hose to gas control fitting in heater (see Figure 11, page 11).

IMPORTANT: Hold gas fitting with wrench when connecting flexible gas hose.

2.Locate two masonry screws in hard- ware package.

3.Place heater base in fireplace.

4.Place logs in their proper position on heater base.

5.Center heater base and logs front-to- back and side-to-side in fireplace.

6.Carefully remove logs without moving heater base.

7.Mark screw locations through one hole on each side of the mounting bracket (see Figure 12, page 11). If installing in a brick-bottom fireplace, mark screw locations in mortar joint of bricks.

8.Remove heater base from fireplace. If installing optional control accessories, do so at this time. Follow all directions provided with accessory.

9.Drill holes at marked locations using 3/16" drill bit.

10

105224

Page 10
Image 10
FMI FVFM27PR installation manual Installing Damper Clamp Accessory for Vented Operation, Installing Heater Base Assembly

FVFM27PR specifications

The FMI FVFM27PR is a cutting-edge kitchen range that combines both style and functionality, making it a perfect addition for modern culinary spaces. Designed with an emphasis on efficiency, this range is equipped to handle various cooking tasks while delivering exceptional performance.

One of the standout features of the FMI FVFM27PR is its powerful gas burners. With multiple burner configurations, users can experience precise control over flame intensity, allowing for perfect searing, simmering, and boiling. This flexibility makes it an ideal choice for professional chefs and home cooks alike, facilitating a wide array of cooking techniques.

The FVFM27PR also boasts an expansive oven capacity, designed to accommodate large meal preparations. The spacious interior allows for cooking multiple dishes at once, making it perfect for entertaining or family gatherings. Moreover, the oven is equipped with advanced convection technology, ensuring even heat distribution and faster cooking times. This technology not only optimizes baking results but also enhances food texture and flavor profiles.

In terms of design, the FMI FVFM27PR features a sleek stainless-steel exterior that brings a modern aesthetic to any kitchen. Its user-friendly control panel is intuitively designed for easy access, featuring clearly labeled knobs and digital displays that provide precise settings for cooking temperatures and times, simplifying meal preparation.

Safety is an essential aspect of the FMI FVFM27PR, with features such as an automatic shut-off function and flame failure safety device. These technologies work together to enhance user safety by ensuring that gas flow is interrupted if the flame goes out, mitigating the risk of accidents in the kitchen.

Additionally, the FMI FVFM27PR integrates smart technology, allowing users to connect to their home Wi-Fi. This feature enables remote monitoring and operation through a smartphone app, providing greater convenience and control over cooking processes even when away from the kitchen.

In conclusion, the FMI FVFM27PR is a versatile, high-performance kitchen range that combines innovative technologies with stylish design. Its powerful burners, spacious oven, and smart capabilities make it an ideal choice for anyone passionate about cooking, whether a novice or a seasoned professional. Investing in the FVFM27PR not only enhances cooking efficiency but also elevates the overall kitchen experience.