INSTALLATION
Continued
NOTICE: A qualified electrician must connect electrical wiring to duplex outlet for
The “Handy Box” with duplex outlet is provided in the firebox located in the lower right base area.
1.Remove screw holding duplex outlet cover to handy box. Remove duplex outlet.
2.Route electrical cable through strain relief and handy box (see Figure 26). Tighten screws on strain relief.
3.Connect electrical cable to duplex outlet. Match wire colors to those on duplex out- let. Be sure to connect the ground wire.
4.Place duplex outlet back into handy box and secure with screws. Replace outlet cover.
Duplex Box/Handy Box
Screws
Strain Relief
Figure 26 -
INSTALLING FIREPLACE HOOD AND SCREEN
1.Loosen screws inside top edge of firebox.
Slide notches in hood over screws and tighten screws (see Figure 27).
2.Install fireplace screen by slipping notches of fireplace screen over screws on front of fireplace (see Figure 28).
Screw
Hood
Figure 27 - Hood Placement
(Model May Vary From Illustration)
Screw
Screen
Figure 28 - Screen Placement
(Model May Vary From Illustration)
www.fmiproducts.com | 19 |