FS-C Functions
58 FS-C Portable DTE Recorder
Loop Record
Loop Record is similar to Retro Disk.
Loop Record continuously records a series of video clips to
available disk space. When all available disk space is used,
Loop Record begins sequentially replacing the earliest clip
with the most recent.
• The size of the video clip depends on the length of the
loop.
• Loops of 60 minutes or less are recorded in one-minute
clips.
• Loops greater than 60 minutes, are recorded in 2GB clips.
• When the capacity of the disk is reached, one additional
clip is created. The size of the last clip depends on the
length of the loop i.e., one-minute or 2GB. The disk must
have at least 30 minutes of disk space available for this
functionality.
Saving Loop Record Clips
Press STOP during a record session.
The FS-C stops recording and saves the current LOOP RECORD
session clips to a folder on the disk.
Snap Record DV modes only
Use Snap to record individual frames. In Snap mode, pressing
Record captures individual frames. All the frames recorded
in the same session are stored in a single file.
• To start a new SNAP record session, place the unit in
STOP between SNAP records.
• Snap Record is available only in DV modes of
operation.
•Use Snap in Local, Syncro Slave, and Tapeless control
modes.
• Removing power from the FS-C in the midst of a Snap
recording session causes the unit to return to Normal
recording mode when it powers back up.