TView QuadScan User's Manual 0092-5000-200
15
the QuadScan’s Channel A or B R-Y IN connector. Connect the B-Y (or Pr) channel of the component source to
the QuadScan’s Channel A or B B-Y IN connector.
If the source has RCA connectors, attach three of the supplied RCA Female to BNC Male adapters to the
channel A or B Y IN, R-Y IN, and B-Y IN connectors. Connect the Television device to the adapter with an
RCA Male to RCA Male cable(s) (not supplied). Connect the Y channel of the component source to the
QuadScan’s Channel A or B Y IN connector. Connect the R-Y (or Pr) channel of the component source to the
QuadScan’s Channel A or B R-Y IN connector. Connect the B-Y (or Pr) channel of the component source to the
QuadScan’s Channel A or B B-Y IN connector.
Determine if VGA pass through is desired you will require an HD15 Female to HD15 Male Cable (SKU# 444-5008).
Connect the VGA device’s HD-15 output to the QuadScan’s VGA IN connector with this cable.
Turn the all of the system components on. Makes sure that the correct input channel of the display device is selected on
the display device. Turn the television source(s) on. Tune the VGA source material on.
If the system has been correctly installed, you will see one of the sources appearing on the display device. The
QuadScan’s signal priority scheme is as follows. As configured from the factory, the default resolution is 640 x 480, and
the default signal priority scheme is automatic. (The automatic signal priority scheme will automatically detect all active
signals present on the QuadScan’s input connectors and automatically select the highest priority signal for processing.
The signal priority is 1) VGA pass through, 2) Channel A Component, 3) Channel B Component, 4) Channel A S-Video,
5) Channel B S-Video, 6) Channel A Composite, 7) Channel B Composite.) The QuadScan saves user information
including resolution and selected input source. If this is other than a first time installation, the above resolution and signal
priority scheme may not be in effect.