QS.1505_GSpro_v3 6/29/04 11:13 AM Page 4
Additional Features
Pulse Mode
Pulse Mode allows you maximum control over the | 4. | After removing desired amount of air, press | |
vacuum process for crushable items in bags. The |
| Instant Seal Button (D) to seal bag. Indicator Light | |
Pulse feature operates similar to the Pulse button on |
| will flash slowly when bag is sealing. | |
a blender. After placing bag in Vacuum Channel (K) | 5. | When motor and light turn off, vacuum process | |
and closing lid, follow these instructions: |
| is complete. | |
1. | Set Seal Control Switch (E) to Pulse Mode. | Tip: When using Pulse Mode, you must press Instant | |
2. | Press down firmly on lid to activate motor, then | Seal Button to seal bag. If there is no activity for 30 | |
| release. | seconds, appliance will shut off automatically and | |
3. | Press Pulse Button (G) and hold for as long as | bag will not be sealed. | |
| desired, then release. Indicator Light (F) will flash |
|
|
| quickly after Pulse Button is used. To remove |
|
|
| more air, simply repeat Step 3. |
|
|
|
|
|
|
Instant Seal |
| More | |
|
|
| |
The Instant Seal Button (D) stops the vacuum process | 3. When motor and Indicator Light (F) turn off, | ||
early and seals the bag, preventing fragile foods such | open lid and remove bag. |
|
|
as cookies from being crushed. | The Instant Seal Button is also used to end Pulse | ||
| |||
1. Vacuum package as described in previous sections. | Mode (see instructions above). |
|
|
2. To stop process before all air is removed, press and |
|
|
|
release Instant Seal Button. Vacuum process will |
|
|
|
stop within a few seconds and bag will be sealed. |
|
|
|
Seal Only
If you want to seal a bag without vacuuming, use the Seal Only position on the Seal Control Switch (E). You can even reseal
1.Place open end of bag on Sealing Strip (N) and close lid.
2.Set Seal Control Switch to Seal Only.
3.Press down firmly on lid with both hands until motor starts, then release. Motor and Indicator Light (F) will turn on, indicating bag is sealing.
4. When motor and Indicator Light turn off, open lid
and remove bag. | And |
|
Note: If Sealing Strip is too hot for a
Seal Only. As long as you place open end of bag on Sealing Strip (not in Vacuum Channel), no air will be removed.