FASSEMBLY

7/16"

Washer7/16" Washer

Front

AxleSteering

Linkage

CoverFront

Axle

10

Slide a 7/16" washer onto the short end of each front axle.

Fit the steering linkage cover onto the front axles.

Note: The steering linkage cover should still face you.

.437 Cap Nut

Front Axle

.437"

11

Fit a .437 cap nut onto the end of a front axle.

Tap the cap nut with a hammer to secure it to the end of the front axle.

Repeat this procedure to fasten another .437 cap nut to the other front axle.

Steering Linkage

Assembly

12

Turn the vehicle so that the front end is toward you.

Lift the front end of the vehicle.

Fit the steering linkage assembly to the front end of the vehicle.

Insert two #12 x 11/4" screws into the holes in the steering linkage. Tighten the screws.

Pull the steering linkage to be sure it is secure. If it is not secure, tighten the screws a few more turns.

Ring Side

First

7/16" Washer

Bushing

(Ring Side First)

Front Axle

13

Slide a 7/16" washer onto a front axle.

Slide a bushing, ring side first, onto a front axle.

12

K3033a-0920

 

 

Page 12
Image 12
Ford F-150 Washer 7/16 Washer Front AxleSteering Linkage CoverFront, Cap Nut Front Axle, Ring Side First Washer Bushing