Configuring Transparent mode

Configuring

Using the web-based manager

After connecting to the web-based manager, you can use the following procedures to complete the basic configuration of the FortiGate unit. Ensure you read the section “Connecting to the web-based manager” on page 18 before beginning.

Switching to Transparent mode

The FortiGate unit comes preset to NAT mode. You need to switch to Transparent mode.

To switch to Transparent mode

1Go to System > Status.

2Select Change beside the Operation Mode.

3Select Transparent.

4Enter the Management IP/Netmask address and the Default Gateway address.

The default gateway IP address is required to tell the FortiGate unit where to send network traffic to other networks.

5Select Apply.

Configure a DNS server

A DNS server is a service that converts symbolic node names to IP addresses. A domain name server (DNS server) implements the protocol. In simple terms, it acts as a phone book for the Internet. A DNS server matches domain names with the computer IP address. This enables you to use readable locations, such as fortinet.com when browsing the Internet.

DNS server IP addresses are typically provided by your internet service provider.

To configure DNS server settings

1Go to System > Network > Options.

2Enter the IP address of the primary DNS server.

3Enter the IP address of the secondary DNS server. Select Apply.

Adding firewall policies

Firewall policies enable traffic to flow through the FortiGate interfaces. Firewall policies define the FortiGate unit process the packets in a communication session. You can configure the firewall policies to allow only specific traffic, users and specific times when traffic is allowed.

For the initial installation, a single firewall policy that enables all traffic through will enable you to verify your configuration is working. On lower-end units such a default firewall policy is already in place. For the higher end FortiGate units, you will need to add a firewall policy.

The following steps add two policies that allows all traffic through the FortiGate unit, to enable you to continue testing the configuration on the network.

 

FortiGate-30B FortiOS 3.0 MR6 Install Guide

26

01-30006-0459-20080505

Page 26
Image 26
Fortinet 30B manual Switching to Transparent mode, To switch to Transparent mode Go to System Status

30B specifications

Fortinet's FortiGate 30B is a compact yet powerful security appliance designed for small to medium-sized businesses and branch offices. This next-generation firewall (NGFW) integrates various security functions, helping organizations safeguard their networks without compromising on performance or ease of use.

One of the standout features of the FortiGate 30B is its robust security capabilities. It offers firewall protection, intrusion prevention systems (IPS), antivirus, web filtering, and application control, all in one device. This consolidated approach simplifies security management, enabling companies to deploy a range of protections without the need for multiple products.

The FortiGate 30B utilizes Fortinet's proprietary FortiOS operating system, which allows for centralized management and visibility into network traffic. With features like FortiView, administrators can gain insights into application usage, user activities, and security events, helping them make informed decisions to enhance their security posture.

Performance is another critical aspect of the FortiGate 30B. Equipped with Fortinet's purpose-built security processing units (SPUs), the device is designed to handle high throughput while maintaining low latency. This ensures that businesses can operate smoothly without facing interruptions caused by security measures.

Additionally, the FortiGate 30B supports advanced technologies such as VPN (Virtual Private Network) for secure remote access and SD-WAN (Software-Defined Wide Area Network) capabilities. This combination enables organizations to optimize their network performance and enhance connectivity between branch offices or remote workers, making it an ideal solution for today's flexible work environments.

A highlight of the FortiGate 30B is its ease of deployment. With a user-friendly interface and guided setup wizards, even those with limited IT experience can configure the device quickly. The included FortiCloud service allows for easy management and monitoring, further simplifying the administrative overhead.

Scalability is yet another critical characteristic of the FortiGate 30B. As businesses grow, they can easily expand their security infrastructure by integrating additional Fortinet solutions into their network, maintaining a cohesive security strategy without disrupting operations.

In summary, the FortiGate 30B offers a comprehensive, high-performance security solution for small and medium-sized organizations. With its integrated features, advanced technologies, and user-friendly management capabilities, it empowers businesses to protect their networks effectively while ensuring optimal performance and scalability for future growth.