Quick Configuration Guide Registering your Fortinet product
FortiGate-5001FA2-LENC Security System Guide
01-30000-76602-20080606 21
Quick Configuration Guide
This section is a quick start guide to connecting and configuring a
FortiGate-5001FA2-LENC security system for your network.
Before using this chapter, your FortiGate-5000 series or compatible ATCA chassis
should be mounted and connected to your power system. In addition, your
FortiGate-5001FA2-LENC boards should be inserted into the chassis and
additional hardware components (such as AMC cards and SFP transceivers)
should be installed. The FortiGate-5001FA2-LENC boards should also be
powered up and the front panel LEDs should indicate that the boards are
functioning normally.
This chapter includes the following topics:
•Registering your Fortinet product
•Upgrading to High Encryption
•Planning the configuration
•Choosing the configuration tool
•Factory default settings
•Configuring NAT/Route mode
•Configuring Transparent mode
•Upgrading FortiGate-5001FA2-LENC firmware
•FortiGate-5001FA2-LENC base backplane data communication
•Powering off the FortiGate-5001FA2-LENC board

Registering your Fortinet product

Register your Fortinet product to receive Fortinet customer services such as
product updates and technical support. You must also register your product for
FortiGuard services such as FortiGuard Antivirus and Intrusion Prevention
updates and for FortiGuard Web Filtering and AntiSpam.
Register your product by visiting http://support.fortinet.com and selecting Product
Registration.
To register, enter your contact information and the serial numbers of the Fortinet
products that you or your organization have purchased. You can register multiple
Fortinet products in a single session without re-entering your contact information.

Upgrading to High Encryption

This FortiGate-5001FA2-LENC board has a factory installed low encryption
feature set. You can purchase a high encryption upgrade within 90 days of
shipment from Fortinet. Fortinet Technical Support can provide a high encryption
license key once you have provided suitable documentation that the necessary
export licenses have been granted for your region, and our legal department has
authorized the use of high encryption.
When you receive the high encryption license key, in the CLI, enter the command
execute crypto-license <high-enc-key>.
Fortinet does not guarantee that the customer will receive a export license upon
purchase of the product or license key.