Fortinet 60B Configuring the modem using the CLI, Keywords and variables, Description, Default

Configuring the modem using the CLI Configuring the modem interface

Keywords and variables	Description	Default
holddown-timer <seconds>	Used only when the modem is	60
	configured as a backup for an
	interface. Set the time (1-60 seconds)
	that the FortiGate unit waits before
	switching from the modem interface to
	the primary interface, after the primary
	interface has been restored.
	This is available only when mode is set
	to redundant.
idle-timer <minutes>	Set the number of minutes the modem	5
	connection can be idle before it is
	disconnected.
	This is available only if mode is set to
	standalone.
interface <name>	Enter an interface name to associate	No default.
	the modem interface with the ethernet
	interface that you want to either back
	up (backup configuration) or replace
	(standalone configuration).
mode {redudant	Enter the required mode:	standalone
standalone}	• redundant
	The modem interface automatically
	takes over from a selected ethernet
	interface when that ethernet interface
	is unavailable.
	• standalone
	The modem interface is the connection
	from the FortiGate unit to the Internet.
modem-dev1{internal	Set the modem type for the selected	internal
pcmica-wireless}	dialup account.
modem-dev2{internal	Set the modem type for the selected	internal
pcmica-wireless}	dialup account.
modem-dev3{internal	Set the modem type for the selected	internal
pcmica-wireless}	dialup account.
passwd1 <password_str>	Enter the password used to access the	No default.
	specified dialup account.
passwd2 <password_str>	Enter the password used to access the	No default.
	specified dialup account.
passwd3 <password_str>	Enter the password used to access the	No default.
	specified dialup account.
peer-modem1	If the modem at phone1 is Actiontec or	generic
{actiontec ascendTNT	AscendTNT, select that type, otherwise
generic}	leave setting as generic.
	This setting applies to models 50AM,
	60M and WiFi-60M only.
peer-modem2	If the modem at phone2 is Actiontec or	generic
{actiontec ascendTNT	AscendTNT, select that type, otherwise
generic}	leave setting as generic.
	This setting applies to models 50AM,
	60M and WiFi-60M only.
peer-modem3	If the modem at phone3 is Actiontec or	generic
{actiontec ascendTNT	AscendTNT, select that type, otherwise
generic}	leave setting as generic.
	This setting applies to models 50AM,
	60M and WiFi-60M only.

	FortiGate-60B FortiOS 3.0 MR6 Install Guide
42	01-30006-0446-20080910