Fortinet 60B manual Example, Configuring the modem interface, 01-30006-0446-20080910

Configuring the modem interface Configuring the modem using the CLI

Keywords and variables	Description	Default
phone1	Enter the phone number required to	No default.
<phone-number>	connect to the dialup account. Do not
	add spaces to the phone number.
	Make sure to include standard special
	characters for pauses, country codes,
	and other functions as required by your
	modem to connect to your dialup
	account.
phone2 <phone-number>	Enter the phone number required to	No default.
	connect to the dialup account. Do not
	add spaces to the phone number.
	Make sure to include standard special
	characters for pauses, country codes,
	and other functions as required by your
	modem to connect to your dialup
	account.
phone3 <phone-number>	Enter the phone number required to	No default.
	connect to the dialup account. Do not
	add spaces to the phone number.
	Make sure to include standard special
	characters for pauses, country codes,
	and other functions as required by your
	modem to connect to your dialup
	account.
pin-init <string>	Enter additional pin initialization strings	No default
	that may be required for a proper
	connection.
priority <integer>	Enter the priority of learned routes on	0
	this interface.
	Valid priorities are from 0 to
	4294967295.
redial <tries_integer>	Set the maximum number of times (1-	No default.
	10) that the FortiGate unit dials the ISP
	to restore an active connection on the
	modem interface. Select none to allow
	the modem to redial without a limit.
status	Enable or disable modem support. This	disable
{disable enable}	is equivalent to bringing an interface up
	or down.
username1 <name_str>	Enter the user name used to access	No default.
	the specified dialup account.
username2 <name_str>	Enter the user name used to access	No default.
	the specified dialup account.
username3 <name_str>	Enter the user name used to access	No default.
	the specified dialup account.
wireless-custom-vendor-id	Enter the wireless modem vendor ID	No default
<hex_string>	as a hexadecimal number.
wireless-custom-product-id	Enter the wireless modem product ID	No default
<hex_string>	as a hexadecimal number.

Example

This example shows how to enable the modem and configure the modem to act as a backup for the WAN1 interface. Only one dial-up account is configured. The FortiGate unit and modem will attempt to dial this account 10 times. The FortiGate unit will wait 5 seconds after the WAN1 interface recovers before switching back to the WAN1 interface.

FortiGate-60B FortiOS 3.0 MR6 Install Guide
01-30006-0446-20080910	43