91
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Setting the digital output signal format (Digi Out T ype)1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "DigiOutType" on the second page and press the
[ENTER] key.
The current setting (by default, "AES/EBU") starts flashing.
<Note>:
See "Checking the remain for recording" on page 52 for details about remain
display.
This menu item selects the format of the digital signal fed from the [DIGITAL OUT]
connector. You can choose between "AES/EBU" (default) and "S/P DIF".
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
3) Use the [MENU] dial to select the desired signal format and press the [ENTER] key.
You can select between "AES/EBU" (default) and "S/P DIF".
AES/EBU A signal in the IEC60958 (AES/EBU) format is output.
S/P DIF A signal in the IEC60958 (S/P DIF) format is output.
By pressing the [ENTER] key after selecting the desired format, the setting is fixed and the
display returns to show the previous screen.
4) Press the [HOME] key to exit the MENU mode.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key
/ keys
key