Fostex PM-1MKII Setup Instructions, Monitoring Distance = 1 to 2 meters, Additional Information

Setup Instructions

Monitoring Distance = 1 to 2 meters

After carefully unpacking the PM-1 MKⅡ Professional Studio Monitor, it is now time to setup the monitors for the best acoustic performance in your studio. The PM-1 MKⅡ was designed to be used at a monitoring distance of 1 to 2 meters, typically referred to as the near-field.

Monitoring Height = the acoustic center aimed at seated ear height

It is recommended that the PM-1 MKⅡ be located in such a way that the acoustic center is located at, or about, seated ear height (see Figure 1). If this is not possible, it may be necessary to tilt/aim the monitor at the listeners ears.

Monitoring Angle = 60 Degrees

The monitoring angle between the left and right monitors and the listening position should equal 60 degrees. The easiest way to determine this is to place the speakers in such a way that the distance between the left and right monitor is equal to the monitoring distance / listening position (see Figure 2). It is also recommended that both speakers be "toed-in" towards the listening position.

Additional Information

The PM-1 MKⅡ was designed to be mounted vertically. This provides for the most accurate frequency response, reduces acoustic boundary interference and provides optimum cooling performance

for the heat sink that is located on the back of the studio monitor. If it is not possible to mount the monitors vertically, then the monitors should be placed with the woofers inside and the monitors "toed-in" towards the listening area.

p-4