Model VC-8 Owner’s Manual
When connecting a 4 BUS OUT mixer
Connect the mixer BUS OUT to INPUT 1~4 of the VC-8 and select [1-4] of the VC-8 ANALOG INPUT MODE switch. Signals input to ANALOG IN 1~4 will be assigned, respectively, to ADAT outputs 1~4 and 5~8. In other words, the ANALOG IN 1~4 signals will be simultaneously sent to tracks 1~4 and 5~8, thus 4 tracks each can be recorded without re-connecting the cables.
| | DATA | | | MIDI | | |
WORD OUT | SCSI | OUT | IN | OUT | IN | AC IN | POWER |
Note: When connecting to a digital recorder with WORD OUT such as VR800, it always must be connected to WORD IN of the VC-8 and used by input of WORD clock.
When connecting a 2 BUS OUT mixer
Connect the mixer BUS OUT to INPUT 1~2 of the VC-8 and select [1-2] of the VC-8 ANALOG INPUT MODE switch. Signals input to ANALOG IN 1~2 will be assigned, respectively, to ADAT outputs 1~2, 3~4, 5-6 and 7-8. In other words, the ANALOG IN 1~2 signals, in the above combinations, will be simultaneously sent to each 2 tracks for recording without re-connecting the cable.
Note: When connecting to a digital recorder with WORD OUT such as VR800, it always must be connected to WORD IN of the VC-8 and used by input of WORD clock.
7
