Foundry Networks manual AR1204 Front Panel, AR1204 Back Panel, AR1202 Back-Panel Ports

Product Introduction

	Table 2.2: AR1202 Back-Panel Ports
Connector	Description
WAN 1 - WAN 2	WAN connection ports. These ports accept cables with RJ-48C connectors.
FE 0 / 1	Ethernet LAN connection ports. These ports accept cables with RJ-45 cable
	connectors.
AUX	Reverse telnet connection. This port accepts a cable with a male DB-9
	connector.
Console	Console management port. This port accepts a cable with an RJ-45 cable
	connector.
DC power	12 VDC power connection. This port accepts the 2 mm. power connector on
	the DC power supply cable that ships with the AR1202 router.

AR1204

AR1204 Front Panel

The router front panel houses the system LEDs.

The following section identifies and describes the AR1204 router network ports and LEDs.

Figure 2.3 AR1204 Router Front Panel

	LINK/ACT HS DUP		LINK/ACT HS DUP		Power LED
WAN Port
LEDs 1-4		Ethernet 0 LEDs		Ethernet 1 LEDs

AR1204 Back Panel

The AR1204 router back panel provides connections for four WAN ports, two 10/100 Base-T Ethernet ports, one AUX port, one Console port, and a 12 VDC power input jack.

June 2004 © 2004 Foundry Networks, Inc. 2 - 3