Foundry Networks manual Installing the AR1202 and AR1204 Router, Table Top Installation

Installation

Figure 3.7 Rack-Mount Components

Rack Tray (2) Rack Carriage Assemblies

2) Mounting Brackets (4) Velcro Tie Wraps (2 sets) Velcro Mounting Pads

4) 10-24 x .5 Phillips	(4) 10-24 x .5 Phillips	(6) 6-32 x .25 Phillips	4) 4-40 x .25 Phillips
Pan Head Screws for	Pan Head Screws for	Flat Head Mounting	Pan Head Rack Carriage
Equipment Rack	Equipment Rack	Bracket Screws	Screws

Installing the AR1202 and AR1204 Router

The AR1202 and AR1204 router can be installed on a table top, in a Telco equipment rack (using the optional rack-mounting tray), or on a vertical surface (using the optional wall-mounting assembly). The router ships with a Console cable. You will need to obtain additional cables for your specific application. Refer to Figure 3.2 on page 3-2and Figure 3.3 on page 3-2.

CAUTION: Do not block the cooling vents on the top of the unit.

NOTE: For problem-free operation, the router should be located in an area with adequate ventilation.

Table Top Installation

To install the AR1202 and AR1204 for operation on a table top, follow this procedure. Refer to Figure 3.8 on page 3-6.

June 2004 © 2004 Foundry Networks, Inc. 3 - 5