INSTALLATION INSTRUCTIONS

Be sure the appliance is properly installed and grounded by a qualified technician. It is the responsibility of the technician to be certain that your range is properly installed. Situations caused by improper installation are not covered under the warranty. Any expenses incurred due to such situations will not be paid by the manufacturer of the appliance.

WARNING: To reduce the risk of tipping the appliance by abnormal usage or improper door loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. To check if the device is installed and engaged properly, carefully tip the range forward. The anti-tip device should engage and prevent the range from tipping over.

If this range is removed for any reason, service or cleaning etc,. it must be replaced as outlined in the installation instructions, before placing the range back in operation.

LEVELING A FREE

STANDING RANGE

All free-standing ranges must be level to obtain proper cooking results. The leveling legs should be screwed into the corner brackets. Place a level, or a pan or measuring cup partially filled with water, level on oven rack. Adjust leveling legs until the range is level. The top of the side panels should be level with countertop or work surface.

IMPORTANT: Be sure to keep the leg levelers. Leveling of the range is very important.

GAS CONNECTIONS

Have the dealer where you purchased your new range install or recommend a qualified installer. Installation must conform with local codes. The range should be connected to a supply line with 1/2-inch black iron pipe or a certified flexible type stove connector. To prevent gas leaks, put an approved sealing compound, which is resistant to liquefied gases, on all threaded connections.

IMPORTANT: Do not apply pressure directly to the range manifold pipe when tightening supply connections. The manifold pipe should be held securely at the pressure regulator to prevent twisting. Hold the pressure regulator with a wrench during the tightening of the connection, or the manifold pipe may be twisted and split, causing a dangerous leak.

Note: The installation of ranges designed for manufactured (mobile) homes must conform to specific standards and local codes.Check all piping connections in the unit for leaks. Never use an open flame to check for gas leaks. It is possible for connections made at the factory to leak due to vibrations encountered in transportation. Have any suspected leaks repaired before use by a qualified service personnel.

ELECTRICAL

Your range is grounded with a three-conductor (three-prong plug) supply cord which

CONNECTIONS

will ground the range when plugged into a similar grounded wall receptacle.

 

 

If the backgaurd of the range has a clock or light, connect the cord from the backgaurd into the special terminal block located at the top of the main back directly under the backgaurd supply cord.The appliance must be electrically grounded when installed in accordance with local codes.

5

Page 5 Page 7
Page 6
Image 6
Danby DR3009WGLP Installation Instructions, Leveling a Free Standing Range, GAS Connections, Electrical
Page 5 Page 7

DR3009WGLP specifications

The Danby DR3009WGLP is a compact, yet powerful refrigerator that caters to the needs of various settings, from small apartments to office spaces. With its sleek design and smart functionality, this appliance stands out as an essential addition to any small living area.

One of the main features of the Danby DR3009WGLP is its ample storage capacity, offering 3.1 cubic feet of space. This makes it ideal for storing essential groceries, beverages, and snacks without taking up excessive room. The refrigerator is designed with adjustable shelves, allowing users to customize the organization based on their needs. The crisping drawer is an added bonus, designed to keep fruits and vegetables fresh for longer periods.

Energy efficiency is a significant consideration in modern appliances, and the Danby DR3009WGLP does not disappoint. This refrigerator is Energy Star rated, which means it meets strict energy-efficient guidelines set by the U.S. Environmental Protection Agency. Not only does this help to reduce energy consumption, but it also results in cost savings on electricity bills, making it an environmentally friendly choice.

The refrigerator features a manual defrost system, ensuring that ice build-up is manageable. Although manual defrost may require a bit more effort than automatic defrost systems, it gives users control over the defrosting process, which can lead to more efficient cooling in the long run.

Moreover, the Danby DR3009WGLP incorporates a built-in thermostat, enabling users to adjust the internal temperature easily, ensuring that food is stored at the optimal temperature for preservation. The solid door is not only stylish but also offers better insulation, contributing to temperature control and energy efficiency.

In terms of design, the Danby DR3009WGLP boasts a modern look with its white finish, allowing it to blend seamlessly with any décor. The reversible door feature adds flexibility, enabling users to install the unit in various locations without concern for door swing limitations.

In conclusion, the Danby DR3009WGLP is a remarkable refrigerator that combines style, efficiency, and practicality. With features such as a spacious interior, energy efficiency, adjustable shelving, and a contemporary design, it is specially suited for those who require a reliable, space-saving solution for their cooling needs. Whether for a college dorm, office, or a small kitchen, this refrigerator is a practical choice that does not compromise on performance.
Top Page Image Contents