Connections | ø 150 |
| |
DUCTED VERSION AIR EXHAUST SYSTEM |
|
When installing the ducted version, connect the hood to the | 25 |
chimney using a rigid 6” duct. (not supplied) | 10 a |
•Install the damper 10a ø 6”.
•Fix the duct in position using sufficient pipe clamps.
| DUCTLESS VERSION AIR OUTLET |
|
• | Fix the connection 15 to the frame using the 4 screws provided. |
|
• | Fix the flange 10 to the lower opening of the connection 15. | 15 |
|
|
• Connect the hood air outlet to the flange in the lower part of the junction using a rigid ø 6” tube (not supplied).
10
Chimney assembly - Mounting the hood body
•Position the upper chimney section and fix the upper part to the frame using the 2 screws 12c provided.
•Similarly, position the lower chimney section and fix the lower part to the frame using the 2 screws 12c provided.
Before fixing the hood body to the frame:
•Remove the grease filters from the hood body.
•Remove any activated charcoal filters.
•From below, use the 4 screws 12f provided to fix the hood body to the frame.
12c |
12c |
12f |
EN |
| 1 |
| 11 |
