Franke Consumer Products FMY 367 installation instructions Use, Control board

USE

A B C DE F G H

Control board

Key	Function	Display
A	Switches the blower motor on and off at the	Indicates the selected speed.
	latest selected speed
B	Decreases the vent speed.
C	Increases the vent speed.
D	By pressing this key it is possible to activate	HI appears. The spot down on the right side
	the intensive speed from any previously se-	flashes once a second.
	lected speed. The intensive speed can be acti-
	vated even when the motor is OFF. This speed
	has been timed at 10 minutes. After that time
	the system activates automatically the latest
	selected speed. This function is recommended
	for cooking condition where vapors and odors
	need to be eliminated immediately and quickly.
E	By pressing this key it is possible to set up the	Indicates the 24-function.The spot down on
	motor to a suction speed at 60 CFM lasting 10	the right side flashes and the motor is on.
	minutes every hour. After this the motor	Once the process is finished the previous indi-
	switches off automatically.
		cation disappears:
	When the filter saturation is going on it is pos-
		FF Indicates that the metal grease filters
	sible to reset the alarm by pressing this key for	saturation alarm has been triggered, and
	about 3 seconds. The indication is visible only
		the filters need to be washed. The alarm
	when the motor is off.	is triggered after 100 working hours.
		EF Indicates that the charcoal filter satura-
		tion alarm has been triggered, and the fil-
		ter has to be replaced; the metal grease
		filters must also be washed. The charcoal
		filter is triggered after 200 working hours.
F	By pressing this key it is possible to set the	Indicates both the selected speed of the hood
	delayed shutdown of the appliance to 30 min-	and the time left before the hood shutdown.
	utes. This function is suitable for a complete	The spot down on the right side flashes alter-
	elimination of the residual odors. It can be ac-	nately displaying the speed and shutdown time.
	tivated at any position, and it is deactivated by
	pressing the key again or by switching off the
	motor.
G	Turns light on and off .
H	Turns light on and off at reduced intensity.

EN	1
	11