Franke Consumer Products FNE 368 TC W Chimney assembly, Electrical Connection

ELECTRICAL CONNECTION

• Remove the cover from the Field Wiring Compartment with a

phillips screwdriver.Green

Ground

• Feed the Power Supply Cable through the electrical knockout. screw Connect the Power Supply Cable to the range- hood cable. At- tach the Power Supply Cable grounding lead to the green screw provided. Attach the White lead of the power supply to the White lead of the rangehood with a twist-on type wire connec- tor. Attach the Black lead of the power supply to the Black lead of the rangehood with a twist-on type wire connector.

• Replace the cover.

Chimney assembly

Upper exhaust Chimney
• Slightly widen the two sides of the upper flue and hook them	2.1
behind the brackets 7.2.1, making sure that they are well	2
seated.
• Secure the sides to the brackets using the 4 screws 12c sup-	2.2
plied.

• Make sure that the outlet of the extensions pieces is aligned with the chimney outlets.

Lower exhaust Chimney

•Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.

•Fix the lower part laterally to the hood body using the 2 screws 12c supplied.

Ground wire

Power supply cable

7.2.1

12c

12c

12c

EN	1
	10