Franke Consumer Products FNE 368 TC W installation instructions Control board

USE

A B C D EF G H I L

Control board

Key	Function	Display
A	Switches the blower motor on and off at the latest	Indicates the selected speed.
	selected speed
B	Decreases the vent speed.	The number of lit LEDS decreases.
C	Increases the vent speed.	The number of lit LEDS increases.
D	By pressing this key it is possible to start the inten-	I flashes and the LEDS are all lit.
	sive speed from any previously selected speed ex-	By pressing the key the function is
	cept the Delay-function and 24H-function. This	stopped.
	speed has been timed at 10 minutes. After that time
	the system activates automatically the latest selected
	speed. This function is recommended for cooking
	condition where vapors and odors need to be elimi-
	nated immediately and quickly.
E	By pressing this key it is possible to set up the motor	24 appears and the LEDS extinguish one
	to a suction speed at 60 CFM.	by one.
		By pressing the key the function is
		stopped
F	By pressing this key it is possible to set the delayed	A flashing clock-symbol appears.
	shutdown of the motor and the lighting to 30 min-	By pressing the key the function is
	utes. This function is suitable for a complete elimi-	stopped
	nation of residual cooking odours. Functioning only
	when the motor is on(not during the 24H-function or
	intensive function). By pressing the key the function
	is stopped
G	By pressing this key for about 2 seconds it is possi-	After 100 working hours a drop-symbol
	ble to reset the filter saturation alarm	appears. Metal grease filters have to be
		washed.
		After 200 working hours C appears.
		Charcoal filters have to replaced.
H	By pressing this key the intensity of the lighting
	system can be decreased.
I	Switches on/off the lighting system at the maximum
	intensity.
L	By pressing this key the intensity of the lighting
	system can be increased.

Keyboard lock: it is possible to jam the keyboard when, for example, cleaning the glass. The motor and lights are switched off.

By pressing the F-key (Delay) for about 5 seconds the keyboard block can be activated or de- activated. This function is confirmed by a Beep and by moving motor LEDS on display.

EN	1
	11