FittingtheUpperChimneyandtheHoodBody
• Position theupper chimneystackand . x thetop | ofit to the |
frameusing2ofthescrewsremovedasabove. |
|
• Open the lighting unit bypulling on the notch, d | isconnect it |
fromthehoodcanopybyslidingoutthepin. |
|
• Removethefiltersoneatatimebypushingthem | towardsthe |
backofthegroupandpullingdownatthesametime | . |
•Removetheactivatedcharcoalfilters,iffitted.
•Inordertofixthehoodbodytotheframeinsert the4screws
12f intheirseats.Itisnecessarytoleaveatleast4 | 5mmgap |
| ||
betweenthescrewheadsandtheframeplate. |
|
| ||
• Hookthehoodcanopytotheframeandturnitto | theleftuntil |
| ||
itreachesthestop,thenlockthescrewsimmediate | lytoprevent |
| ||
thehoodcanopyfromfallingoutaccidentally. |
|
| ||
Recirculationversion |
|
|
| |
• Makesurethattheoutletoftheextensionpiece | 14.2 ishori |
| ||
zontallyandverticallyalignedwiththechimneyou | tlet. | 2 | ||
• If this is not the case, remove the lower Chimney | Stack and | |||
| ||||
adjustthepositionofExtension | 14;replacetheelementsasde |
| ||
scribedabove. |
|
|
| |
•InsertConnectorExtension 14.1 sidewaysintoExtension 14.2 .
•Fitthedirectionalgrill 8 intothehousingprovided.Alsomake surethatitisproperlyfittedintoconnector 14.1.
1
14.1
8
ELECTRICALCONNECTION |
|
• ConnecttheHoodtothemainspowersupply,inser | tingatwo |
pole cutout switch with contact aperture of at lea | st 3 mm |
alongtheline. |
|
•Ensurethatthesupplycableconnectorisproperl yinsertedinto theSuctiondevicesocket
• HookuptheCommandsconnector | Cmd. |
•HookuptheSpotlightsconnector Luxtothesocketprovided behindthelightingunitcover.
• For the Recirculation Version, fit the Activated | Charcoal |
OdourFilter. |
|
• Replacethefiltersandthelightingunit. |
|
Lux
Cmd
EN |
| 2 |
| 23 |
