Franke Consumer Products GL 62 M XS, GL 66 M XS manual Installation, Kitchen unit requirements

Installation

Important: installation must be done in compliance with established standards and regulations. It must be done by a Franke Technical Service Centre

Kitchen unit requirements

For built-in units, the components (plastic materials and wooden veneer) must be assembled with heat resistant adhesive (max 100°C): unsuitable materials and adhesives can result in warping and failure of the adhesive. The unit must allow sufficient room for the electrical cabling. The unit must be robust enough to support the weight of the appliance.

The oven must be securely installed in the compartment. The oven may be installed in a column unit or underneath the top of a modular unit, so long as sufficient ventilation is provided.

13