Installer checkoff list
If range does not operate | If you need service |
RANGE
✓Range correctly positioned in countertop cutout.
✓Maintained specified distances to cabinet surfaces.
✓Rangeside. level – front to back – side to
✓Burner caps positioned properly on sealed burner bases.
✓All packing material removed.
✓Backguard or island trim attached (see page 3).
✓Depending on model, grille parts correctly assembled.
✓Depending on model, griddle parts correctly assembled.
GAS SUPPLY
✓The range is connected only to type of gas for which it is certified for use.
✓Check that the circuit breaker is not tripped or the house fuse blown.
✓Check that gas valves are turned to the “ON” position.
✓See Use and Care Guide for troubleshooting list.
If you need assistance
The KitchenAid Customer Interaction Center will answer any questions about operating or maintaining your range not covered in the Installation Instructions. The KitchenAid Customer Interaction Center is open 24 hours a day, 7 days a week. Just dial
When you call, you will need the range model number and serial number. Both numbers can be found on the model/serial rating plate located on the surface below the control panel.
In the event that your KitchenAid appliance should need service, call the dealer from whom you purchased the appliance or a
You can also obtain the service company's name and number by dialing, free within the continental United States, the KitchenAid Customer Interaction Center telephone number,
Maintain the quality built into your KitchenAid appliance — call a
Maintenance
If removing the range is necessary for maintenance, shut off gas supply. Disconnect the gas and electric supply. Finish removing the range.
9
