Franklin BSI-6300 manual Getting Started, Charging the Battery with your Computer

Models: BSI-6300 Gran Maestro Color Speaking Spanish-English

1 63
Download 63 pages 36.51 Kb
Page 4
Image 4
1. Getting Started

Please read the following safety warnings and precautions before using your device. Note: If this device is to be used by young children, this User’s Guide should be read to them by an adult and their use of the device should be monitored. Failure to do so may cause injury.

1. Getting Started

1.1 Charging the Battery

Your device is powered by a rechargeable lithium polymer battery of capacity 600 mAh. When you see the low battery warning, please recharge the battery. Please charge the battery before your first use of the device.

Installing the Battery For the First Time

Follow these instructions to install the battery for the first time.

1.Turn your device over.
2.Open the battery cover on the back of the unit.

3.Insert the battery by gently connecting to the connector on your device.

1. Getting Started

Make sure the battery fits snugly into the compartment after it is connected.

4.Replace the battery compartment door.

Charging the Battery with your Computer

Plug the wide end of a USB cable into a USB port on your computer and the smaller end of the USB cable into the USB port on your device. It generally takes

a few hours to completely recharge the battery.

Charging the Battery with the AC Adapter

1.Find the AC adapter and the replaceable plugs included with your device.

Note: It may be necessary to attach a

3

Page 4
Image 4
Franklin BSI-6300 Getting Started, Charging the Battery, Installing the Battery For the First Time, Turn your device over