Using a Password

 

Using the Calculator

 

 

 

If the unit does not reset after pressing the reset button, remove the battery, wait at least two min- utes, and then re-install it.

➤To Set a Password

1. Press .

2. Press to highlight Set Password and press EINGABE.

3. Type a password and then press

EINGABE.

Your password can have up to 8 letters. You are prompted to retype your password.

4. Type your password again exactly as you did the first time.

5.Press EINGABE to confirm and enable your password.

To disable the password, repeat Steps 1 and 2 above, and press EINGABE when Enter New Password is displayed.

➤To Make a Calculation

1.Press until you see the cal- culator screen.

2.Type a number.

Note: Q-Pwill type numbers 0-9 automatically.

You can type up to 10 digits. To type a decimal, press G(.).

To change the sign of a number, press Y(+/-).

3.Press H(+), J(-), K(X), L(÷) to add, subtract, multiply, or divide.

4.Type another number.

5.Press EINGABE.

To repeat the calculation, press EINGABE again.

6.Press CLEAR to clear the cur- rent calculations.

61