Installing the Battery

 

Installing the Battery

 

 

 

Your DBD-470 is powered by one CR2032, 3-volt battery. Before using the device, gently pull the battery insulation tab to remove it. Use a paper clip to gently press the RESET button on the back of the device. See “Resetting Your DBD-470” for details.

Warning! Pressing the RESET button with more than light pressure may permanently disable the device. In addition, resetting the unit erases settings and information you may have entered.

Replace the battery when the display dims.

Warning!! If the battery wears out completely, or if you take more than a few seconds while changing the bat- tery, any user-entered information will be erased. You should always keep written copies of your important infor- mation.

Follow these instructions to install or replace the battery.

1.Turn the unit off and turn it over.2.Lift the battery cover on the back of the unit by pushing up on the catch.3.Use a paper clip, if necessary, to remove the old battery.

4.Install the battery positive side fac- ing up in place of the old battery. Note: Do not remove the foam protector from the other battery slot or attempt to install a battery there. Your device only functions with the battery where it was pre- installed.

5.Replace the battery cover.

Battery disposal: Do not dispose of batteries with normal household waste. Please obey your local regulations when disposing used batteries.

Note: If the keyboard fails to respond or if the screen performs erratically, perform a system reset.

39