Installing a Book Card

Warning: Never install or remove a book card while your BOOKMAN is turned on. If you do, information that you have entered in the built-in book, as well as in any other installed book cards, may be erased.

1.Turn your BOOKMAN off.2.Turn your BOOKMAN over.3.Align the tabs of the book card with the notches in the slot.4.Press the book card down until it snaps into place.➤Removing Book Cards

Warning: When you remove a book card to install another, information that you entered in the removed book card may be erased.

Selecting a Book

Once you have installed a book card in your BOOKMAN, you can select which book you want to use.

1.Turn your BOOKMAN on.2.Press CARD .

These are sample books.

3.Press or to highlight the book you want to use.4.Press ENTER to select it.➤Follow the Arrows

The flashing arrows on the right of the screen show which arrow keys you can press to move around the screen.

➤Resuming Where You Left Off

You can turn off your BOOKMAN at any time. When you turn your BOOKMAN on again, the screen that you last viewed reappears.

5