Franklin FLX-2074 Resetting Bookman Changing the Settings, Use the arrow keys to high Light Setup

Resetting BOOKMAN Changing the Settings

If the BOOKMAN keyboard fails to re- spond, or if its screen performs erratically, first press CLEAR and then press ON/OFF twice. If nothing happens, follow the steps below to reset it.

Warning: Pressing the reset button with more than very light pressure may permanently disable your BOOKMAN. In addition, resetting your BOOKMAN unit erases settings and information entered into its built-in book, and in any installed books.

1.Hold CLEAR and press ON/OFF . If nothing happens, try Step 2.

2.Use a paper clip to gently press BOOKMAN’s reset button.

The reset button is recessed in a pin- sized hole on the back of your BOOKMAN. Look for it on the battery cover or near the book card slot.

This unit may change operating modes due to electro-static discharge. Normal operation of this unit can be reestablished by pressing the reset key, ON/OFF, or by re- moving or replacing batteries.

The type size, screen contrast, and time of shutoff can be adjusted to suit your needs using the Setup menu.

Set Type changes the number of lines of text that appear on the screen. Set Contrast adjusts the screen to lighter or darker shades. The Set Shutoff changes the time your BOOKMAN stays turned on if you forget to turn it off.

1.Press CLEAR or MENU .

2.Use the arrow keys to high-

light Setup.

3.Highlight Set Type Size, Set Shutoff, or Set Contrast.

4.Press ENTER to select.

Or press or if you selected Set Contrast.

To exit without changing settings, press BACK .

5.Press ENTER to select a setting.

15