Ethernet Port
Enable the Ethernet Port when you want to connect your compute directly to the R526 using a LAN (RJ45) cable. Default is ‘Disable’.
Power Saving
yWiFi Radio Off ‐ You can use the Radio Off mode to customize your device to switch to a low power mode when you don’t use the internet. There are 10 minute increments from 10‐60 minutes. Select Never to disable this power saving feature.
If you want to switch the WiFi Radio on earlier than the time you set in this menu, you can easily push the power button one time lightly. A blue WiFi LED of indicates that R526 is ready to connect.
yPower Off ‐ The Power Off mode allows you to choose when your device will automatically power off, to save battery life, due to inactivity. There are 10 minute increments from 10‐60 minutes you can select.
Select Never to disable this power saving feature.
Router
yDHCP Server ‐ Enabling the DHCP server allows the device to automatically assign a local IP address to a new device joining your network (such as a wireless printer or an additional laptop). When the DHCP server is disabled, you will have to assign static IP addresses to all devices on your network.
Note.
If you want to disable the DHCP, please set the IP, Subnet Mask, Gateway as below.
IP : 10.10.10.1 ~ 10.10.10.253
