Installation

Remove the exterior and interior packaging. Use a soft dry cloth to wipe down the outside of the Beverage Cooler thoroughly. Use a clean cloth dampened with lukewarm water to wipe down the inside of the Cooler.

Air must circulate freely in front of the Beverage Cooler. Avoid placing the Cooler near any source of heat or moisture, or in direct sunlight. Direct sunlight may affect the finish, and nearby heat sources will cause higher electrical consumption. This model, FBC36OD, is supplied with a plastic cover that should be placed over the unit when the Cooler is not in use.

The FBC36OD Outdoor Beverage Cooler is designed to be either free-standing or built-in. It has motorized fans at the back of the unit that direct compressor-generated heat away from the compressor and through the front of the unit. Other than keeping the front vents unobstructed, there are no clearance requirements for this unit.

The FBC36OD Beverage Cooler is supplied with two sets of feet.

a)For normal outdoor use, there are 4 rolling casters, 2 with locking mechanisms that should be installed at the back, and 2 without locks for the front. The casters allow the unit to be wheeled into place; the rear wheels should be locked once the unit is in position.

b)For indoor use, there are 4 leveling legs that should be installed and then turned to level the unit. This reduces vibrations.

Electrical Connection

Important! For your personal safety, this appliance must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk of shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be inserted into an outlet that is properly grounded and installed. The ground wire cannot be connected to a gas pipe, heating pipe, water pipe, telephone line or lightning rod. It cannot be replaced with the neutral wire of single-phase power. In addition to the ground wire, an electrical leakage circuit breaker is also required. Consult a qualified electrician if you do not completely understand these grounding instructions.

DO NOT UNDER ANY CIRCUMSTANCES CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

If installation in a damp location is unavoidable, have an electrician install a ground fault circuit interrupter (GFCI) electrical outlet. If no GFCI is installed, electrical shock could result.

5

Page 5 Page 7
Page 6
Image 6
Franklin Industries, L.L.C FBC36OD manual Installation, Electrical Connection
Page 5 Page 7

FBC36OD specifications

Franklin Industries, L.L.C has established itself as a leader in the manufacturing of innovative and efficient industrial solutions. Among its standout products is the FBC36OD, a versatile and high-performance device designed to meet the demanding needs of various industries. This machine is renowned for its durability, functionality, and cutting-edge technology, making it a preferred choice for many professionals.

The FBC36OD features a robust construction that allows it to operate reliably in even the most challenging environments. Its frame is made from high-strength materials that ensure longevity and resistance to wear and tear. This reliable build quality is complemented by its advanced design, which emphasizes ease of use and maintenance.

One of the main characteristics of the FBC36OD is its impressive operational efficiency. It is equipped with a state-of-the-art engine that optimizes fuel consumption while delivering powerful performance. This balance between power and efficiency makes it ideal for heavy-duty tasks without compromising on cost-effectiveness.

Technologically, the FBC36OD incorporates several innovations that enhance its functionality. The machine features intuitive controls that streamline operation, allowing users to adapt quickly to various tasks or requirements. Additionally, its advanced diagnostic system enables real-time monitoring of performance and maintenance needs, reducing downtime and improving productivity.

The FBC36OD is also designed with versatility in mind. It can easily be adapted for a wide range of applications, from construction sites to manufacturing facilities. This adaptability ensures that it can fulfill the needs of different sectors while providing consistent results.

In summary, Franklin Industries, L.L.C’s FBC36OD stands out in the industrial equipment market due to its robust construction, operational efficiency, and advanced technologies. Its user-friendly design combined with its ability to handle various tasks make it an ideal choice for professionals seeking reliability and performance. As industries continue to evolve, the FBC36OD is poised to remain a top contender in providing effective solutions for modern industrial challenges.
Top Page Image Contents