To adjust the temperature, press the SET button, then use the UP/DOWN keys to navigate to the preferred temperature. For example, if you are storing red wine, you may want to set a temperature of 61 degrees Fahrenheit.

When the correct temperature appears in the DISPLAY window of the control panel, press SET to confirm. Remember that each compartment has separate controls so you will need to set the temperature in each compartment separately.

PLEASE NOTE: Cold air falls and warmer air rises, and there will be a small temperature variation from the bottom to the top of the unit. The temperature sensor is located in the middle of each compartment and records the temperature at that point. The temperature at the bottom of the unit will always be slightly colder.

Drip Tray

At the rear of the unit, near the bottom, you can see a plastic tray positioned above the compressor. This tray catches water that condenses inside the appliance. Heat from the normal operation of the compressor should evaporate the water that collects in the tray.

Interior Lights

Each compartment has an interior light that can be turned on or off by pressing the ON/OFF button located on the left side of each control panel. It is not a good idea to leave these lights on for too long. They can raise the internal temperature of the compartments. For instructions on replacement of bulbs, see page 9.

Compressor Run Indicator

When your unit’s compressor is running, either one or both control panels will display moving icons representing a running fan. If the compressor stops running, the icons will stop running as well.

Memorizing Temperature Settings

Your unit has been designed to “remember”the last run mode to which it was set. If you suffer a power outage or any other power cutoff, the unit will automatically return to the previous temperature settings after power is returned.

About the Liquid Crystal Display (LCD)

When you press any key, a blue backlight will appear in the Display Panel. If no other key is pressed, the backlight will automatically go out after 2 minutes.

In the event that there is a fault in the unit, an ALARM indication will appear on the screen.

ALARM Mode

In ALARM mode, the unit will make a beeping sound and display an alarm message. If the LCD on the control panel displays any of the following messages: PROBE ERROR, LOW TEMP or HIGH TEMP, consult the Troubleshooting section of this manual.

7

Page 7 Page 9
Page 8
Image 8
Franklin Industries, L.L.C FBC36OD Drip Tray, Interior Lights, Compressor Run Indicator, Memorizing Temperature Settings
Page 7 Page 9

FBC36OD specifications

Franklin Industries, L.L.C has established itself as a leader in the manufacturing of innovative and efficient industrial solutions. Among its standout products is the FBC36OD, a versatile and high-performance device designed to meet the demanding needs of various industries. This machine is renowned for its durability, functionality, and cutting-edge technology, making it a preferred choice for many professionals.

The FBC36OD features a robust construction that allows it to operate reliably in even the most challenging environments. Its frame is made from high-strength materials that ensure longevity and resistance to wear and tear. This reliable build quality is complemented by its advanced design, which emphasizes ease of use and maintenance.

One of the main characteristics of the FBC36OD is its impressive operational efficiency. It is equipped with a state-of-the-art engine that optimizes fuel consumption while delivering powerful performance. This balance between power and efficiency makes it ideal for heavy-duty tasks without compromising on cost-effectiveness.

Technologically, the FBC36OD incorporates several innovations that enhance its functionality. The machine features intuitive controls that streamline operation, allowing users to adapt quickly to various tasks or requirements. Additionally, its advanced diagnostic system enables real-time monitoring of performance and maintenance needs, reducing downtime and improving productivity.

The FBC36OD is also designed with versatility in mind. It can easily be adapted for a wide range of applications, from construction sites to manufacturing facilities. This adaptability ensures that it can fulfill the needs of different sectors while providing consistent results.

In summary, Franklin Industries, L.L.C’s FBC36OD stands out in the industrial equipment market due to its robust construction, operational efficiency, and advanced technologies. Its user-friendly design combined with its ability to handle various tasks make it an ideal choice for professionals seeking reliability and performance. As industries continue to evolve, the FBC36OD is poised to remain a top contender in providing effective solutions for modern industrial challenges.
Top Page Image Contents