Operating the Internal Lights
Each compartment has an internal light to make it easier for you to see the wines you have stored. To turn these lights on or off, simply use the ON/OFF button located on the left side of the control panel.
Please note: The internal lights should not be left on for a prolonged period of time, since the heat generated can raise the temperature of the stored wine.
Compressor Run Indicator
When your unit’s compressor is running, both control panels will display moving icons represent- ing a running fan. If the compressor stops running, the icons will stop running as well.
Memorizing Temperature Settings
Your unit has been designed to “remember” the last run mode to which it was set. If you suffer a power outage or any other power cutoff, the unit will automatically return to the previous tempera- ture settings after power is returned.
About the Liquid Crystal Display (LCD)
When you press any key, a backlight will appear in the Display Panel. If no other key is pressed, the backlight will automatically go out after 2 minutes.
In the event that there is a fault in the unit, an ALARM indication will appear on the screen.
ALARM Mode
In ALARM mode, the unit will make a beeping sound and display an alarm message.
If the Liquid Crystal Display (LCD) on the control panel displays any of the following messages: PROBE ERROR, LOW TEMP or HIGH TEMP, consult the Wine Cellar Troubleshooting section of this manual.
Shelving
The shelves in your unit are
Care and Cleaning of Your Wine Cellar
Cleaning the Outside
Clean the outside of your unit with mild soapy water. Dry thoroughly with a soft cloth. To clean the door gasket, use only mild soapy water. Never use harsh detergents or scouring pads to clean any part of your Wine Cellar.
Cleaning the Inside
Unplug your Wine Cellar and remove all bottles. Rinse the inside surface with plain water and dry the chrome shelves.
6
