Partitioning your FHD-3
GB
6
Note: Partition size of large hard disks will not be displayed correctly! However partitioning results will be OK.
7.Select Option 1 "(Create DOS partition or Logical DOS drive)" by pressing '1' and confirm with 'Return'.
8.Select Option 1 "(Create primary DOS partition)" by pressing '1' and confirm with 'Return'.
Wait until drive integrity is completely checked.
9.If only one partition is required then answer "Y" to the question: "Do you wish to use the maximumavailable size for a Primary DOS partition?" If more than on partition is required go to the next section "Create two or more partitions on the
Now the whole disk will be partitioned as one primary partition. Wait until the drive integrity check is completed.
10.Press the 'ESC' key to return to the fdisk options.
11.Now press the 'ESC' key to close the "fdisk window". Your hard disk is now partitioned.
43
